How to Build Rustic Farmhouse Table

Jun 27th
Rustic Farm Dining Table
Rustic Farm Dining Table

Rustic farmhouse table – A rustic oak dining table in either a sturdy farmhouse style or with a clean, smooth surface will encourage your guests to linger over dinner. Cutting a sheet of oak to make it 36-inches by 72-inches. If you can not find a plate, glue together pieces of 3/4-inch oak, alternating the direction of the rings with each piece. Terminal tree together, or use biscuit joints to join the pieces.

Finish the edges by either using a band knife or a hand planer for a rugged look, or use the rustic farmhouse table saw a sharp-edged finish. Sand the top carefully. Cut Newel posts to the desired height. Put a cantilever on each side, angling an 8-inch layer screw on each. Make sure the corbels and the end of Newel’s level. Using a console that is at least 10-1 / 2 inches long to make the table stable. Cut the stretcher bar to length and fasten it between Newel posts by unscrewing a lag screw with the post and into the stretcher bar. Insert hole with a dowel rod, leaving exposed dowel 1/2 inch.

12 Picture Gallery: How to Build Rustic Farmhouse Table

Cut two 12-inch square leg plates out of 3/4-inch wood. Mount the leg plates on top of the newel post using 3-inch deck screws. Turn the tabletop again and draw a line along the edge, 3 inches from the edge. Cut twelve 1-by-2-by-8-inch pieces. Attach them on their flat side on the bottom of the table with 1-1 / 4-inch deck screws. Place these clamps along the inner edge between the places where the legs will attach. Mitre the edges of the 1-by-4-inch pieces, which will form the apron around the perimeter of the underside of the rustic farmhouse table.

RELATED:   Modern Farmhouse Table and Chairs

This post topic: Farmhouse Table

Other Interesting Things About Farmhouse Table Photos